Eye Features Set > Docs > Stylized Eyebrow Settings

Main Shape

Geometry Type - The type of output geometry
Inflate Shape - Inflate the eyebrow geometry to create more volume

Eyebrow Corners

Settings for the eyebrow top corner:

Pull Top Corner - Pull the top corner towards the eyebrow body
Ease Top Corner - Ease the transition between the top and bottom corner of the eyebrow
Smooth Top Corner - Smooth the top corner of the eyebrow
Smooth Bottom Corner - Smooth the bottom corner of the eyebrow

Eyebrow Tail

Settings for the eyebrow tail:

Bulge Tail - Inflate the tail thickness
Round Tail - Round off the tail tip

Main Thickness - The main thickness of the eyebrow
Levels - Amount of control points for the eyebrow thickness
Thickness Head - Thickness at the first control point
Thickness 1/3 - Thickness at the second control point
Thickness Mid - Thickness at the middle control point
Thickness 2/3 - Thickness at the fourth control point
Thickness Tail - Thickness at the last control point
Thickness 1/3 Point - Adjust the position of the second control point
Thickness Midpoint - Adjust the position of the middle control point
Thickness 2/3 Point - Adjust the position of the fourth control point

Eyebrow Head Splits

Splits Count - The number of splits of the eyebrow head
Splits Region Size - The size of the region of the eyebrow splits
Splits Seed - Variations in the shape of the eyebrow splits
Splits Shape - Adjust the shape of the splits along their length
Splits Flat Tips - Open up the splits' tips to create a flatter shape

Splits Length

Settings for the length of the splits:

Length Randomize - Create variations in the length of each split
Length Seed - Variations for the length of the splits

Splits Bend

Settings for bending the splits:

Bend - Bend the eyebrow splits
Bend Randomize - Create variations in the amount and direction of the eyebrow splits bending
Bend Seed - Variations in the split bending

Cuts Depth

Settings for the cuts between the splits:

Cuts Depth - Set the depth of the splits' cuts
Cuts Seed - Variations in the splits' cuts

Cut Width - The width of the cut
Cut Position - The position of the cut along the length of the eyebrow
Smooth Cut - Smooth the cut edges
Tilt Cut - Tilt the cut

Material

Material - The material for the eyebrow

UV Map

Settings for the eyebrow UV map:

Pack UV Islands - Scale the islands of the UV map and move them so they fill the UV space as much as possible
Pack Margin - Space between islands
Pack Rotate - Rotate islands for best fit

Resolution

Settings for the eyebrow mesh resolution:

Resolution - Main resolution level setting. When "Harmonize Resolution" is disabled, this setting gives the number of segments along the length of the eyebrow.
Profile Resolution - The number of segments along the profile of the eyebrow
Harmonize Resolution - If enabled, the entire mesh resolution is set by the main "Resolution" setting. The profile segments are set automatically to produce the best looking shape for the given resolution level. Leave this setting enabled for best results.

Miscellaneous

Additional settings for the eyebrow:

Direction - The direction of the eyebrow (Left/Right eye)
Base Mesh - Select the base mesh for the eyebrow. Hairs will grow on the base mesh surface.
Guide Smoothing - Smooth the initial guide curve/mesh line
Offset from Face - Offset the eyebrow from the base surface
Switch Direction - Switch the direction of the guide curve/mesh line. Use this to fix unexpected eyebrow direction. Otherwise it should be off.